Disc Information - Sony PDW-HD1500 Operation Manual

• When VITC is red in playback mode. (This has no
relations to the display in the time data display section.)
• When VITC is being recorded, and when VITC is
1)
recorded in E-E mode after recording starts because
one of the following conditions is met.
- Setup menu item 619 VITC is set to "on".
- When VITC is present in the selected video input
signal, and that line is set to "thru" with item 723
INPUT VIDEO BLANKING in the setup menu.
E Time data type: Displays the type of time data
displayed in the time data display section. The type of
time data is selected with CNTR SEL on the HOME
page of the function menu (see page 41).
Display Type of time data
TC Timecode
COUNTER Elapsed recording/playback time
UB User bits
VITC VITC
VIUB VIUB
TCG Timecode generator value
UBG User bits generator value
F Time data: Normally displays timecode or VITC,
according to the selection made with TCR on page P4
TC of the function menu.
f Disc information
59.94i
422-1080
50Mbps
8CH-24BIT
A Disc loaded indication: Appears when a disc is loaded
in this unit. When no disc is loaded, the usable format
is displayed.
The background color of the disc loaded mark
indicates one of the following disc states.
Blue: Disc capable of recording and playback.
Yellow: Disc capable of playback only.
Red: Disc incapable of recording and playback.
Note
Even if the background is blue, recording is not
possible in the following cases.
• When a disc with recording inhibited is loaded.
• When REC INHI on the HOME page of the function
menu is set to "ON".
B Recording frequency: Displays the system frequency
of the clips recorded on the disc.
A Disc loaded indication
B Recording frequency
C Video format
D Audio format
C Video format: Displays the video format and bitrate of
the clips recorded on the disc.
D Audio format: Displays the audio format of the clips
recorded on the disc.
g System information
A Power status
DEFAULT B Menu setting status
RM-i.LINK
C Remote interface
D Repeat mode
REPEAT
E Jog/shuttle dial mode
SHTL/JOG
A Power status: Displays the status of the power supply
to the unit.
Display Power status
AC power
Battery
Battery almost exhausted: Flashes at 1 Hz
Battery exhausted: Flashes at 4 Hz
AC power (power-saving mode)
Battery (power-saving mode)
Battery (power-saving mode/low)
B Menu setting status: Displays the current setting
status of setup menu.
Display Description
BANK1 The current menu settings are the same as
the settings in menu bank 1.
BANK2 The current menu settings are the same as
the settings in menu bank 2.
BANK3 The current menu settings are the same as
the settings in menu bank 3.
DEFAULT The current menu settings are the same as
the factory defaults.
No display The current menu settings are different from
all of the above.
C Remote interface: When the remote control switch is
set to REMOTE, displays the name of the interface
selected with setup menu item 214 REMOTE
INTERFACE.
D Repeat mode: Appears when setup menu item 142
REPEAT MODE is set to "play".
E Jog/shuttle dial mode: Appears when the unit is in
shuttle, jog, or variable mode.
21
Front Panel