Sony PDW-HD1500 Operation Manual page 65

Add Sub Clip
TC 00:30:25:11 TC 00:30:40:13
TC 00:24:24:29 TC 00:24:34:27
Scene Selection
3
Select the sub clips that you want to add from the
upper part of the screen (the part where 8 thumbnails
are displayed, multiple selections possible).
To select from expanded thumbnails
Press the EXPAND button to display the expand
thumbnail screen.
To select from chapter thumbnails
Press the CHAPTER button to display the chapter
thumbnail screen.
4
Press the PUSH SET(S.SEL) knob.
The thumbnail selection is confirmed, and an I cursor
appears at the bottom of the Add Sub Clip screen (in
the Scene Selection window). The I cursor indicates
the location where the currently selected sub clips will
be inserted.
To display the total duration after addition of the
selected clips
Press the SHIFT button.
5
In the Scene Selection window, move the I cursor to
the location where you want to insert the clip. (The
existing thumbnails arrange themselves to the left and
right of the I cursor.)
6
Press the PUSH SET(S.SEL) knob.
The sub clips are added at the I cursor position, and
you return to the clip list thumbnail screen.
You can check the results of the addition in that screen.
7
Repeat steps 1 to 6 as required to add more clips.
8
Save the clip list (see page 67).
In step 1, you can also perform a shortcut operation by
pressing the PUSH SET (S.SEL) knob with the SHIFT
button held down.
002 017/035
TC 01:01:28:25 TC 00:09:43:14
TC 00:24:46:22 TC 00:24:56:24
00:13:48:24
TOTAL
To add clips from the playback window (quick
insertion)
This method allows you to decide the range to use and add
that range as a sub clip while viewing the video. It does not
use thumbnail screens. You can do this during recording,
playback (including pauses), and searches.
1
Find the point that you want to make the start point of
the sub clip, and then press the PUSH SET(S.SEL)
knob with the B/IN button held down.
An In point is set and the IN indicator lights.
2
Find the point that you want to make the end point of
the sub clip, and then press the PUSH SET(S.SEL)
knob with the b/OUT button held down.
An Out point is set and the OUT indicator lights. (This
determines the range of the sub clip to be added).
To check the timecode of the In point or Out point
Press the B/IN button or the b/OUT button.
To cue up the In point or Out point
Press the PREV button or the NEXT button with the
B/IN button or b/OUT button held down.
To check the duration
Press the B/IN and b/OUT buttons at the same time.
To delete the In point or Out point
Press the RESET/RETURN button with the B/IN or
b/OUT button held down.
3
With the SHIFT button held down, press the PUSH
SET(S.SEL) knob.
A sub clip with the range specified in steps 1 and 2 is
added to the end of the current clip list.
When you specify a range that spans several clips
Sub clips are generated for each of the clips in the
range.
4
Repeat steps 1 to 3 as required to add more sub clips.
5
Save the clip list (see page 67).
To reorder sub clips
See page 56 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, select the thumbnails
of the sub clips that you want to move (multiple
selections possible).
2
Display the Thumbnail Menu.
Scene Selection (Clip List Editing)
65