Connections For Cut Editing - Sony XDCAM PDW-1500 Operation Manual

3-1-4 Connections for Cut Editing

By connecting this unit to a VTR (for example, MSW-
M2000/M2000P or DSR-2000/2000P) and an editing
control unit, you can make up a cut editing system. Some
example connections are shown in the following.
When using an editing control unit
Cut editing system comprising this unit as a player, an
MSW-M2000/M2000P unit as a recorder, and a BVE-700
editing control unit.
Video monitor
Reference video signal
REF.VIDEO
IN
PDW-1500 (player)
REMOTE
2
PLAYER-1
PDW-1500 (player) settings
Remote control switch (see page 20): REMOTE
Extended menu item 214 "REMOTE INTERFACE": 9PIN
To analog audio input connector
To composite video
input connector
3
1
VIDEO OUT 2
(SUPER)
AUDIO MONITOR
OUT
SDI OUT 1
RECORDER
BVE-700
When making the connections, also refer to the manuals
provided with the equipment to be connected.
See page 41 for more information about editing control
unit settings.
1: 75 Ω coaxial cable (not supplied)
2: 9-pin remote control cable (not supplied)
3: Cable with RCA phono plugs (not supplied)
To composite video input connector
1
1
1
REF.VIDEO
INPUT
COMPOSITE VIDEO
OUTPUT 3(SUPER)
2
1
AC IN
REF.VIDEO IN
MSW-M2000/M2000P (recorder) settings
REMOTE 1(9P) button: Lit
For details about the settings of the MSW-M2000/M2000P, refer
to the operation manual for the unit.
Video monitor
SDI INPUT
REMOTE 1IN(9P)
MSW-M2000/M2000P
(recorder)
35
3-1 Connections and Settings