M40: EXTENDED MENU
M41: SETUP CUSTOMIZE
M51: IP ADDRESS PRESET
M52: SUBNET MASK PRESET
M4: SETUP MAINTENANCE: items relating to the setup menu
Select whether to display the extended menu.
DISABLE: Do not display.
Select whether to enable the customization function of the setup menu.
Displays the status of the menu bank where the current menu settings are stored.
Select whether to temporarily back up (save) setup menu settings before operations such as
PUSH SET (S.SEL) knob: Back up (save) the settings.
MENU button: Return to next highest menu level without backing up.
Select whether to restore (load) setting that were backed up (saved) with the "SAVE MENU
PUSH SET (S.SEL) knob: Restore (load) the settings.
MENU button: Return to the next highest menu level without restoring.
Select the bank to be stored in menu bank 4, or reset menu bank 4.
Cur to 4 (CURRENT TO BANK4): Store the current menu settings in menu bank 4.
1 to 4 (BANK1 TO BANK4): Store the menu bank 1 settings in menu bank 4.
2 to 4 (BANK2 TO BANK4): Store the menu bank 2 settings in menu bank 4.
3 to 4 (BANK3 TO BANK4): Store the menu bank 3 settings in menu bank 4.
Reset (RESET BANK4): Reset menu bank 4.
Select whether to recall settings automatically from a menu bank when the system is
powered on, and if so which menu bank to recall from.
off: Do not recall settings from a menu bank.
Bank1 (from BANK1): Recall settings from menu bank 1.
Bank2 (from BANK2): Recall settings from menu bank 2.
Bank3 (from BANK3): Recall settings from menu bank 3.
Bank4 (from BANK4): Recall settings from menu bank 4.
Reset the current menu settings to the factory settings.
PUSH SET (S.SEL) knob: Reset.
MENU button: Return to the next highest menu level without resetting.
• The system frequency setting is also cleared. If you execute this item, reset the system
frequency (see page 28).
• Date and time settings are not cleared, but the time zone setting is cleared. After executing
this item, reset the time zone (see page 28).
M5: NETWORK: items relating to network settings
Set whether to assign an IP address automatically with the DHCP server.
DISABLE: Do not assign automatically.
ENABLE: Assign automatically.
Set IP address.
When DHCP is set to "ENABLE", it is not possible to set the IP address.
Set the subnet mask.
When DHCP is set to "ENABLE", it is not possible to set the subnet mask.