Sony PDW-HD1500 Operation Manual page 112

Alarm message in time
data display section
ILL. Disc!
Salvage NG!
a)
525/60 Clip
a)
625/50 Clip
a)
4CHx16 Clip
a)
2CHx16 Clip
No Support!
ILL. Index!
FORMAT NG!
DI read err
Read err
DRV ADJ err
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on" or "limit".
During front panel operations
Alarm message in time
data display section
a)
KEY INHI.!
a)
REMOTE!
a)
No Disc!
REC INHI.!
b)
No Clip!
a)
Disc Top!
112
Troubleshooting
Alarm message in monitor video
section
IRREGULAR DISC IS USED.
USE PROFESSIONAL DISC.
CLIP SALVAGE WAS NOT COMPLETED. See "Handling of discs when recording does not end
IRREGULAR DISC IS USED. DVCAM
525/60 CLIP(S) EXIST.
IRREGULAR DISC IS USED. DVCAM
625/50 CLIP(S) EXIST.
DISC HAS 4CHx16 BIT CLIP(S).
CHANGE RECORD FORMAT IN SETUP
MENU.
DISC HAS 2CHx16 BIT CLIP(S).
CHANGE RECORD FORMAT IN SETUP
MENU.
FORMAT NOT SUPPORTED.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
INDEX FILE ERROR.
PLEASE FORMAT DISC OR EJECT.
AUTO FORMATTING WAS NOT
COMPLETED.
CANNOT READ DISC INFORMATION.
PLEASE EJECT DISC.
CANNOT PERFORM AUTO DRIVE
ADJUSTMENT.
Alarm message in monitor video
section
KEY INHIBIT MODE IS SELECTED.
REMOTE MODE IS SELECTED.
SET REMOTE/LOCAL/NETWORK
SWITCH TO LOCAL.
NO DISC.
THE DISC WRITE PROTECT TAB IS SET
TO SAVE.
REC INHIBIT MODE IS SELECTED.
NO CLIP.
DISC TOP.
Description/action
Use a Professional Disc.
normally (salvage functions)" (page 47).
Use another disc.
Change the setting of AUDIO CONTROL >REC
MODE in the setup menu.
Change the setting of AUDIO CONTROL >REC
MODE in the setup menu.
A disc in an unsupported recording format is loaded.
Use a disc formatted in the MPEG HD or DVCAM
format.
Format the disc, or eject it (see page 69).
Eject the disc and insert it again, or insert another
disc.
Description/action
This appears when the KEY INHI switch is "on".
Set the KEY INHI switch "off".
Set the remote control switch to "LOCAL".
Insert a disc and try again.
Set the disc's Write Inhibit tab to enable recording
(see page 44).
This appears when REC INHI on the HOME page of
the function menu is set to "ON".
Set REC INHI to "OFF" (see page 41).
This appears when a playback, search or delete
operation is attempted on a disc with no clips
recorded on it.
Insert a disc with clips recorded on it.
This appears if you press the PREV button or conduct
a high-speed reverse search when the unit is stopped
at the start of the disc.
Use forward search or playback instead.