Assigning User-Defined Clip Titles - Sony PDW-HD1500 Operation Manual

• File names and directory names can use letters, numbers,
and symbols from the Unicode 2.0 (UTF-8) character
set.
However, the following control characters and
1)
symbols cannot be used.
- Control characters: U+0000 to U+001F, U+007F
- Symbols: ", *, /, :, <, >, ?, \, |
1) The following character codes cannot be used by FAM connections.
U+010000, U+020000, U+030000, U+040000, U+050000, U+060000,
U+070000, U+080000, U+090000, U+0A0000, U+0B0000, U+0C0000,
U+0D0000, U+0E0000, U+0F0000, U+100000

Assigning user-defined clip titles

By default, clips on each disc are assigned names in the
range C0001.MXF to C4999.MXF. For this reason, two
discs can contain clips with the same names. The
automatic title generation function allows you to assign
titles to all of the clips on several discs, which facilitates
clip management. For example, if the titles TITLE00001 to
TITLE00020 are assigned to clips C0001.MXF to
C0020.MXF on disc 1, then the titles TITLE00021 to
TITLE00037 are assigned to clips C0001.MXF to
C0017.MXF on disc 2.
C0002.MXF
C0001.MXF
TITLE00002
TITLE00001
Clips recorded on Disc 1
C0002.MXF
C0001.MXF
TITLE00022
TITLE00021
Clips recorded on Disc 2
Proceed as follows to specify a title and assign it to
recorded clips.
1
Press the MENU button.
2
Turn the PUSH SET (S.SEL) knob to select setup
menu item 035, and press the knob.
3
4
5
6
C0020.MXF
TITLE00020
7
8
C0017.MXF
9
TITLE00037
10
11
To check the titles of recorded clips
Press the THUMBNAIL button to display the thumbnail
screen, and select the clip whose title you want to check.
Turn the PUSH SET (S.SEL) knob to select "on", and
press the knob.
The clip title naming screen appears.
RETURN
IT EM -03 5
SELECT
CL IP TI TLE N AMI NG
S EL ECT
* TI TLE - d isa bl e
PR EFI X - T ITL E
SAVE
NU MER IC - 0 000 1
EXIT
SETUP
Turn the PUSH SET (S.SEL) knob to move the
asterisk (*) on the left of the menu items to "TITLE",
and press the knob.
The asterisk indicates the selected item.
Turn the PUSH SET (S.SEL) knob to select "enable",
and press the knob.
The automatic title generation function is enabled.
Turn the PUSH SET (S.SEL) knob to move the
asterisk (*) on the left of the menu items to the item
you want to select, and press the knob.
PREFIX: A string of up to 10 characters. The
allowable characters are alphanumeric characters,
symbols (! # $ % & ' ( ) + ,- . ; = @ [ ] ^ _ { } ~),
and the space character.
NUMERIC: A five-digit number (00001 to 99999) to
serve as the initial value of the serial number.
Turn the PUSH SET (S.SEL) knob to select the
character position to set, and press the knob.
Turn the PUSH SET (S.SEL) knob to select the
character to set.
Repeat steps 7 and 8 as required.
When you are setting the "NUMERIC" item, you can
press the RESET button to return the initial value of
the serial number to 00001 (factory default setting).
Carry out steps 7 to 9 to set the other item.
Press the SAVE function (F5) button.
The title is saved.
75
Overview