Sony PDW-HD1500 Operation Manual page 77

RETURN
I TE M- 0 36
SELECT
F IL E NA M IN G
* N A M IN G FO R M
A U T O NA MI N G
E N D
SAVE
EXIT
SETUP
5
Turn the PUSH SET (S.SEL) knob to select "free",
and press the knob.
You are now able to use clips and clip lists with user-
defined names.
6
Turn the PUSH SET (S.SEL) knob to move the "*" to
the left of "AUTO NAMING", and press the knob.
7
Turn the PUSH SET (S.SEL) knob to select "title",
and press the knob.
8
Press the SAVE function (F5) button.
The same name will now be given to newly recorded
clips.
To use clips and clip lists with user-defined
names over FAM and FTP connections
Carry out steps 2 to 5 of "To assign clip names on this
unit", and then press the SAVE function (F5) button.
It is now possible to write, transfer, and rename clips and
clip lists with user-defined names over file access mode
(FAM) connections (page 78) and FTP connections
(page 80).
Fuji.MXF
Able to use clips with user-defined names
over FAM and FTP connections
Sakura.SMI
Able to use clip lists with user-defined names
over FAM and FTP connections
To check clip names
Press the THUMBNAIL button to display the thumbnail
screen, and select the clip whose name you want to check.
The name of the selected clip appears at the upper left of
the screen.
See "Thumbnail Operations" (page 57) for more
information about the thumbnail screen.
- C* ** *
- C* ** *
Note
The item at the upper left of the screen is displayed
according to the following order of priority.
Title > User-defined clip name > Standard format clip
name
Therefore, the display of this item changes as following,
depending on whether there is a title.
- When a title has been set as a clip name on this unit, for
clips recorded on this unit, the title is displayed.
- The user-defined name or standard format name is
displayed for clips without a title.
77
Overview