Download  Print this page

Advertisement

During recording and editing operations
Alarm message in time
data display section
a)
Input Sig!"
a)
HD 60I/30P
a)
HD 50I/25P
a)
HD 23P Disc
a)
ILL. REF!
a)
ILL. REC!
a)
ILL. PLAY!
a)
MEM. Full!
a)
MEM. Empty!
Recording
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on" or "limit".
Alarm message in monitor video
section
INPUT SIGNAL FREQUENCY IS NOT
THE SAME AS THE SYSTEM SETUP.
DISC CANNOT BE RECORDED. HD 60I
or HD 30P CLIP(S) EXIST.
DISC CANNOT BE RECORDED. HD 50I
or HD 25P CLIP(S) EXIST.
DISC CANNOT BE RECORDED. HD
23.98P CLIP(S) EXIST.
INPUT VIDEO SIGNAL DOES NOT
SYNCHRONIZE WITH REF VIDEO
SIGNAL.
USE COMMON REFERENCE SIGNAL
OR CONNECT RECORDER REF OUT TO
PLAYER REF IN.
ENCODING DOES NOT SYNCHRONIZE
WITH REF VIDEO.
ILLEGAL PLAYBACK.
MEMORY FULL !!
MEMORY EMPTY !!
NOW RECORDING ...
Description/action
This appears when an input signal does not match
the system frequency of this unit.
Input a signal that matches the system frequency, or
change this unit's system frequency setting (see
page 28).
This appears when the system frequency of this unit
does not match that of the loaded disc.
Insert a disc that matches the system frequency, or
change this unit's system frequency setting (see
page 28).
Input a reference signal synchronized with this unit's
system frequency.
Check the signals being input to this unit.
Check the disc being played by this unit.
Check the disc being recorded by this unit.
Wait for recording to finish.
115
Troubleshooting

Advertisement

Table of Contents

   Related Manuals for Sony PDW-HD1500

Comments to this Manuals

Symbols: 0
Latest comments: