Sony PDW-HD1500 Operation Manual page 58

thumbnails. This function allows you to quickly review the
selected clip or segment and to search efficiently for a
target scene.
Note
The maximum number of blocks may be smaller than 1728
when the recorded duration of the clip is short. In this case,
the frame interval of expanded thumbnails is fixed at 1
frame. This allows you to view expanded thumbnails at
equal intervals.
See page 56 for more information about thumbnail screen
operations.
1
In the clip thumbnail screen, select the thumbnail of
the clip that contains the scene you want to find.
2
Press the EXPAND button.
The selected clip is divided into 12 blocks, and a list
appears in the expand thumbnail screen (see page 53)
with the first frame of each block displayed as a
thumbnail.
3
Select the thumbnail that you want to expand further.
4
Repeat steps 2 and 3 up to 2 times, as required.
Note
Thumbnails cannot be further expanded when they already
have the minimum duration (1 frame).
To return to the previous expansion level
Press the EXPAND button with the SHIFT button held
down.
Using the chapter function to find scenes
Sections between shot marks and Rec Start are called
chapters.
Rec Start essence marks are set automatically at the start of
recording, but shot marks can be set at any scene during
recording or playback.
The chapter function allows you to display thumbnails of
the chapters in a clip.
See "To set shot marks" (page 46) for more information.
See page 56 for more information about thumbnail screen
operations.
58
Thumbnail Operations
1
In the clip thumbnail screen, select the thumbnail of a
clip with chapters set.
The "S" mark appears on the thumbnails of clips with
chapters set.
2
Press the CHAPTER button.
The chapter thumbnail screen (see page 53) appears,
with thumbnails of the frames where chapters are set.
The "S1" and "S2" marks on the thumbnails indicate
frames where Shot Mark1 and Shot Mark2 marks are
set.
Thumbnails without one of these marks are frames
where Rec Start are set.
To delete the shot mark at a chapter position
You can delete the shot mark (Shot Mark1 or Shot Mark2)
at the chapter position in the chapter thumbnail screen.
(Rec Satrt cannot be deleted.).
1
In the chapter thumbnail screen, select the thumbnail
for the frame whose shot mark you want to delete.
2
Display the Thumbnail Menu.
3
Select Delete Shot Mark.
A message appears asking if you are sure that you want
to delete the shot mark.
Clip List:E0001
Delete Shot Mark
TC 00:00:00:00 TC 00:00:04:14
Delete 002?
TC 00:00:28:08 TC 00:00:35:15
TC 00:00:59:16 TC 00:01:06:18
28 JUL 2006 19:55
DATE&TIME
4
Select OK to delete the mark, or Cancel to cancel the
deletion, and then press the PUSH SET(S.SEL) knob.
To adjust the position of shot marks at
chapter positions
You can use the chapter thumbnail screen to adjust the
position of shot marks (Shot Mark1 and Shot Mark2) at
chapter positions. (The positions of Rec Start essence
marks cannot be adjusted.)
1
In the chapter thumbnail screen, select the thumbnail
of the shot mark whose position you want to adjust.
2
Display the Thumbnail Menu.
002/013
TC 00:00:12:04 TC 00:00:20:13
OK
TC 00:00:46:08 TC 00:00:53:22
Cancel
TC 00:01:13:11 TC 00:01:17:27
00:01:31:16
TOTAL DUR