Sony PDW-HD1500 Operation Manual page 66

3
Select Move Sub Clips, and then press the PUSH
SET(S.SEL) knob.
The Clip List (Move) screen appears.
[
Clip List (Move)
TC 00:00:00:00 TC 00:00:21:27
TC 00:04:35:12 TC 00:04:57:10
TC 00:06:03:03 TC 00:06:25:00
08 AUG 2007 11:50
DATE&TIME
4
Move the I cursor to the point where you want to move
the selected thumbnails.
5
Press the PUSH SET(S.SEL) knob.
The sub clips are moved to the I cursor position.
6
Repeat steps 1 to 5 as required.
7
Save the clip list (see page 67).
To adjust clip lengths (trim)
Proceed as follows to adjust the length of a clip by
changing its In point and Out point.
See page 56 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, select a thumbnail.
2
Display the Thumbnail Menu.
3
Select Trim Sub Clip, and then press the PUSH
SET(S.SEL) knob.
The Clip List (Trim) screen appears.
Clip List (Trim)
TCR 01:17:33:08
Like the clip playback screen, this screen allows you to
play and search all clips on the disc.
66
Scene Selection (Clip List Editing)
006 001/034
TC 00:04:06:00 TC 00:04:13:14
TC 00:05:19:08 TC 00:05:41:05
TC 00:06:46:27 TC 00:07:08:25
00:13:48:24
TOTAL DUR
001/034
00:13:48:24
Total
00:00:21:27
DUR
IN
01:17:33:08
OUT
01:17:55:05
019/035
OK
CLIP
Cancel
To display a list of In and Out point operations that
you can perform
Press the MENU button.
4
When you find the point that you want to make the
start point, select "IN" and then press the PUSH
SET(S.SEL) knob.
The timecode of the new In point appears in the
timecode display, and the Total (total duration) and
DUR (clip duration) displays are updated.
5
When you find the point that you want to make the end
point, select "OUT" and then press the PUSH
SET(S.SEL) knob.
The timecode of the new Out point appears in the
timecode display, and the Total (total duration) and
DUR (clip duration) displays are updated.
To cue up the In point or Out point
Display the Thumbnail Menu, select Cueup Inpoint or
Cueup Outpoint, and then press the PUSH SET
(S.SEL) knob.
To cancel the In point or Out point setting
Display the Thumbnail Menu, select Reset Inpoint or
Reset Outpoint, and then press the PUSH SET (S.SEL)
knob.
The In point or Out point setting returns to the previous
value.
6
Select OK, and then press the PUSH SET(S.SEL)
knob.
7
Repeat steps 1 to 6 as required.
8
Save the clip list (see page 67).
To delete sub clips
See page 56 for more information about thumbnail screen
operations.
1
Select the clips to delete in the clip list thumbnail
screen (multiple selections possible).
2
Display the Thumbnail Menu.
3
Select Delete Sub Clips, and then press the PUSH
SET(S.SEL) knob.
A message appears asking you to confirm the deletion.
4
Select OK, and then press the PUSH SET(S.SEL)
knob.