Input example: SITE CHMOD 444 Clip/C0001.MXF
(Lock clip C0001.MXF)
Time Code With FAM and
When you are connected to the unit by FAM or FTP, you
can create new clips with time code that is continuous with
the time code of the last frame of the last clip on the disc.
To record continuous time code, set TCG on page 4 TC of
the function menu to "INT", and set PRST/RGN to "TC".
Then proceed as follows.
Continuous time code cannot be recorded if PRST/RGN
on page 4 TC of the function menu is set to "VITC".
See "Extended menu operations" (page 102) for more
Write clip files to the unit from the computer or other
device that is connected to this unit.
Use the "STOR" command to transfer clip files from the
computer that is connected to this unit.
If you issue the "SITE UMMD" command immediately
before the "STOR" command, the original time code of the
transferred file is recorded, regardless of the setting of
TCG on page 4 TC of the function menu.
Recording Continuous Time Code With FAM and FTP Connections