Error Messages; To Eject Discs With The Unit Powered Off - Sony PDW-HD1500 Operation Manual

Alarm message in time
data display section
a)
EMPHASIS!
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on".
Alarms relating to sensors and drives
Alarm message in time
data display section
FAN Stopped
DR-FAN Stop
High TEMP!

Error messages

Error codes appear in the time data display when an error
(usually a hardware problem) occurs. In addition, both
error messages and error codes appear in the monitor video
section and on the video monitor connected to the unit.
When an error message appears, follow the instructions in
the error message to resolve the problem.
E r r o r 5 0 - 0 1 0
Error code in time data display area
AN ERROR HAS BEEN
DETECTED. INFORM SERVICE
OF FOLLOWING CODE:
PRESS EJECT KEY
TO EJECT DISC.
Error code
Example error in monitor video section
118
Troubleshooting
Alarm message in monitor video
section
INPUT AUDIO EMPHASIS IS NOT
SUPPORTED.
CHECK THE EMPHASIS OF THE AUDIO
INPUT SIGNAL.
Alarm message in monitor video
section
FAN MOTOR STOPPED.
DRIVE FAN MOTOR STOPPED.
HIGH TEMPERATURE.
HIGH TEMPERATURE IN DRIVE.
Error code
ERROR
50-010
Action
Check the emphasis of the audio input signal.
Description/action
Contact a Sony service representative.
Note
The unit will not stop operating, but if you continue to
use it in this state temperatures inside the unit or the
drive will rise, possibly resulting in failure or fire.
To eject discs with the unit powered
off
As an emergency measure, disc cartridges can be removed
with the unit powered off. This operation should always be
done by a trained service technician.