Inspection Before Riding; Brakes; Tires - HYOSUNG SF 50 Manual

Hide thumbs Also See for SF 50:
Table of Contents

Advertisement

7. INSPECTION BEFORE RIDING

Running inspection once in a day and periodic
maintenance ( 4,000km or 8,000km ) is necessary
for the full performance and preventing accidents.
CAUTION
● Even though the motorcycle is not run
for a long time, the periodic maintence is
necessary.
● The engine and muffler are too hot right
after engine stopped. please be caerful not
to be burned.
● Don' t inspect the engine indoor where
there is little or no ventilation available.
The exhaust gas is extremely poisonous.

BRAKES

� THE BRAKE LEVER
● Turn the front/rear brake adjuster clockwise/or
counterclockwise to obtain the specified play.
● After adjusting the play, check there is no
dragging and enough clearance between the
brake lever and grip when the lever is tightly
squeezed.
� BRAKE FLUID
● Keep the motorcycle upright and place the
handlebar straight.
● Check brake fluid level by observing the middle
line on the brake fluid reservoir.
● When the level is below the middle line,
replenish with brake fluid.
MIDDLE LINE
� THE TIRE PRESSURE
If you see the problem with the tire, adjust the
pressure with the pressure gauge.
OVER
16 16

TIRES

NORMAL
SHORT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf 50 - v1

Table of Contents