Vertical SBX IP 320 Features & Operation Manual page 73

Call Handling
Once the Button is assigned on the station and a call arrives at the covered station:
•
•
•
Conditions
•
•
•
•
•
•
•
Programming
Call coverage Program at station: [TRANS/PGM] + 45
Call coverage flexible button Program: [TRANS/PGM] + Flexible Button + [TRANS/PGM] +
46 + Station number + [HOLD/SAVE]
The coverage station receives audible and visual indications after a programmable delay
when there is a ring on the originating station.
The ring tone is the normal internal or external ring tone cadence and the oldest call
coverage button flashes faster than the others and the others flash the same as the
incoming ring rate.
The coverage station user presses the flashing Coverage Flex Button on the station, or
presses the ON/OFF Button, or lifts the handset. The call will be answered and will cease
to ring and LEDs cease to flash at any other stations that may have the same coverage
appearance.
Multiple coverage stations can have the same remote ringing station(s) programmed on
their keysets.
Once a coverage station answers the call, all the related rings are stopped and the call is
picked-up by the coverage station.
The station user assigns the call coverage button at their station via the Flex Button
programming sequence.
This type of button can be set up on DSS consoles as well as keysets.
A station user can cover an SLT extension. An SLT terminal cannot perform the Call
Coverage function.
If the coverage station is in DND, no audible ring will be heard.
Call coverage does not support hunt group members.
SBX IP 320 Features & Operation Guide
63