Chime Bell - Vertical SBX IP 320 Features & Operation Manual

Call Handling

Chime Bell

If the Chime Bell Activate Station presses Chime Bell button, Chime Bell Receive Station starts
to ring.
To program a flexible button as the "Chime Bell button":
1.
2.
3.
Operation
To Activate the Chime Bell:
To program a flexible button as the "Chime Bell button":
1.
2.
3.
Conditions
•
•
•
•
Admin Programming
•
•
•
•
Press the [TRANS/PGM] button and the flexible button to be assigned.
Dial the code ([TRANS/PGM] + *9).
Press the [HOLD/SAVE] button.
Press the Chime Bell button at the Chime Bell Activate station
Press the [TRANS/PGM] button and the flexible button to be assigned.
Dial the code ([TRANS/PGM] + *9)
Press the [HOLD/SAVE] button.
The ring stops when Chime Bell Timer expires.
Chime Bell Ring cannot be answered.
If Chime Bell Receive station is busy or in an Off-Hook state, the station gets Mute ring
instead.
The Chime Bell master (active station) and slave (receive station) station should be
keysets.
Chime Bell Station Pair (PGM 184 - FLEX 1)
Chime Bell Relay (PGM 184 - FLEX 2)
Chime Bell Timer (PGM 184 - FLEX 3)
Chime Bell Frequency (PGM 184 - FLEX 4)
SBX IP 320 Features & Operation Guide
34