Vertical SBX IP 320 Features & Operation Manual page 182

Rerouting
Admin Programming
•
•
•
•
•
•
SLT Call Forward
An SLT User can forward calls to other stations, CO Lines, or to the System VMIB.
Operation
To activate call forward from an SLT:
1.
2.
3.
4.
5.
To deactivate call forward from an SLT:
1.
2.
3.
Conditions
•
•
Allow Off-net FWD (PGM 111 - FLEX 18)
Authorization Code Table (PGM 227)
Call Forward (PGM 111 - FLEX 2)
Call Forward No Answer Timer (PGM 181 - FLEX 1)
Off-net Call Mode (PGM 112 - FLEX 12)
Unsupervised Conference Timer (PGM 182 - FLEX 6)
Lift the handset.
Dial call forward code 554.
Dial the call forward type.
Dial the Station or Group speed number that will receive call.
-or-
Press the # key to forward to System VMIB.
Replace the handset and go on-hook.
Lift the handset.
Dial the call forward code 554 and number.
-or-
Dial 559.
Confirmation tone should be heard, then replace the handset.
Call forward is maintained until it is deactivated.
A call cannot be forwarded to a station in DND mode; when trying to forward to the
station, an error tone will be heard.
SBX IP 320 Features & Operation Guide
172