Vertical SBX IP 320 Features & Operation Manual page 186

Rerouting
Operation
To transfer to an idle station (unscreened):
1.
2.
3.
4.
To transfer to an idle station (screened):
1.
2.
3.
4.
5.
To transfer to a busy station, use the following procedure:
1.
2.
3.
4.
To make an unscreened transfer by SLT:
1.
2.
3.
4.
Press the [TRANS/PGM] button.
Intercom dial tone sounds and the previous call is placed on exclusive hold.
Dial the station number that will receive the transfer.
Replace the handset or go on-hook.
Press the [TRANS/PGM] button.
Intercom dial tone sounds and the previous call is placed on exclusive hold.
Dial the station number that will receive the transfer.
When the station answers, announce the call being transferred.
Replace the handset or go on-hook.
Press the [TRANS/PGM] button.
The CO Line automatically is placed on exclusive hold and the ICM busy tone sounds.
The transferred station will receive a muted transferred CO Line ring.
If the call is not answered within the designated Transfer Recall time, the CO Line will be
recalled to at transferring station and the attendant will receive a recall ring if the call
remains unanswered.
Press and release the hook-switch, the intercom dial tone sounds.
The CO Line is placed on exclusive hold, and the Transfer Recall timer is activated.
Dial the Station number the call will be transferred to.
Replace the handset and go on-hook.
SBX IP 320 Features & Operation Guide
176