Vertical SBX IP 320 Features & Operation Manual page 109

Incoming Call Pickup
Operation
To program DISA Line Assignment, use the following procedure:
1.
2.
3.
4.
5.
6.
7.
8.
9.
To use DISA Line Assignment, use the following procedure:
1.
2.
3.
Conditions
•
•
•
•
•
•
Press [TRANS/PGM] and enter 140.
Select the CO Line Range to be assigned to DISA Line.
Press [FLEX 2], and select the Ring type and press [FLEX 1].
To select the Ring Type, press [FLEX 1] for Day, [FLEX 2] for Night, [FLEX 3] for
Weekend, or [FLEX 4] for On-demand.
Dial 1.
Press [HOLD/SAVE] to activate the DISA Line Assignment.
Press [FLEX 2], select the Ring Type.
Press [FLEX 2] then enter 01-70 for the VMIB Greeting Assignment.
Press [HOLD/SAVE] to accept changes.
Select the DISA Line you wish to use.
When the tone or announcement is heard, dial the desired station/ hunt group number.
After a connection with the system is made, dial the CO Access Code (Ex., 8801) to call
again outside of the system by securing another CO Line.
You can assign the VMIB announcement instead of the intercom dial tone on a DISA
line.
If the DISA Authorization Code is enabled for a DISA Line, a DND warning tone or
VMIB announcement is heard, guiding the user to enter the DISA Authorization Code,
the dial tone then should be heard.
Each DISA Line may be assigned as full-time DISA or Night Mode Only.
Night mode DISA operates as a normal CO Line during Day mode.
If the VMIB announcement number is stored with #, the CO Line will be dropped after
the VMIB announcement is played.
If the DISA Authorization Code is disabled, the permission is determined by CO to CO
COS & CO COS.
SBX IP 320 Features & Operation Guide
99