Station Message Detail Recording (Smdr) - Vertical SBX IP 320 Features & Operation Manual

Station Message Detail Recording (SMDR)

Station Message Detail Recording (SMDR)
The SBX IP 320 System SMDR (station message detail recording) provides detailed
information about both incoming calls and outgoing calls. In this feature, it is programmable to
record all calls or just outgoing long distance calls. SMDR information includes outgoing CO
Line, dialed number, time, date, station that answer the call, and duration of call. Authorization
codes may also be entered and recorded.
An SMDR record of ICM Calls can also be printed when ICM SMS is sent by Nomad SP or
Nomad IP, and ez Phone
Operation
To print the SMDR:
1.
2.
At the Attendant Station:
3.
4.
5.
To delete an SMDR:
1.
2.
To abort SMDR printing:
1.
2.
Conditions
•
•
•
Activate the PC utility program on a networked PC.
Connect the serial port of MBU to the serial port of the PC with the RS-232C cable.
Press the [TRANS/PGM] button.
Dial 0111 (Station Base) or 0113 (Group Base).
Enter the Station or Group range. The SMDR is printed to the PC.
Press the [TRANS/PGM] button.
Dial 0112 (Station Base) or 0114 (Group Base).
Press the [TRANS/PGM] button.
Dial 0116.
There is an assignable SMDR record option ADMIN Program
(PGM 177 - FLEX 3).
If SMDR - LONG DISTANCE ONLY is selected, only outgoing toll calls will be printed,
except SMDR Local Code (PGM 204).
If SMDR - ALL CALL is selected, incoming and outgoing local and long distance call
are printed.
SBX IP 320 Features & Operation Guide
192