Voip Service; Call By Ip Address - Vertical SBX IP 320 Features & Operation Manual

VoIP Service

VoIP Service

Call by IP Address

This feature is established by receiving IP numbers or dialing IP numbers directly.
Operation
To make an IP call by address:
1.
2.
3.
Conditions
•
•
Admin Programming
•
•
Press the desired {CO} line, {POOL}, or {LOOP} button.
-or-
Dial the CO line or Group code.
Dial tone sounds, then dial the IP address (use the * key in place of where the dots "." of
the IP address would be used). Ex., IP Address: 156.147.3.201, Dialed
number:156*147*3*201)
Press the # button to place the call. If the Called Party is a user in the SBX IP 320 System,
ringing will follow the pre-defined Ring Assignment (PGM 144).
When programming Speed Dial for Direct Call, the # key must not be used (ex., to assign
156*147*3*139 to Speed Dial, enter 156*147*3*139, and not 156*147*3*139#).
In DISA incoming calls, CO access is denied if the line seized by dialing Co access Code
is a VOIB line.
CO Line Service Type (PGM 140)
VOIB IP Setting (PGM 340)
SBX IP 320 Features & Operation Guide
227