Vertical SBX IP 320 Features & Operation Manual page 167

Paging
A user can respond to a page from any station and connect to the paging party for a private
conversation. The user should respond to the page in the Page Time-out duration to connect the
paging party.
ACCESS CODE
501-510
543
544
545
549
Operation
To initialize a page:
1.
2.
3.
4.
To assign Meet-me Page at a FLEX button:
1.
2.
3.
4.
To respond a Meet-me Page:
1.
2.
3.
Internal Page Zones
506-510 = Conference page zones
Internal All Call Page
Meet Me Page
External Page Zone
All Call Page (Internal & External)
Lift the handset or press the [SPEAKER] button.
Dial the desired paging code.
If assigned, after the page warning tone is presented, make the desired announcement.
Replace the handset and go on-hook.
Press the [TRANS/PGM] button.
Press the desired FLEX button.
Dial 544.
Press the [HOLD/SAVE] button to accept changes.
Lift the handset or press the [SPEAKER] button.
Dial 544 (Meet-me Page code).
-or-
In case of Nomad IP, dial Meet-me Page code and press [Send] button.
Press the [HOLD/SAVE] button. The call with the paging party is established and the
zone returns to idle.
SBX IP 320 Features & Operation Guide
ITEM
157