Vertical SBX IP 320 Features & Operation Manual page 168

Paging
Conditions
•
•
•
•
•
•
•
•
•
•
•
•
Admin Programming
•
•
•
•
•
When external paging is required, appropriate external equipment should be attached to
the proper external page connections on the MBU.
A station which is in DND or busy cannot receive a page.
A station which is not allowed to page cannot make a page.
When paging is used in the system, another page is not allowed at the same time.
A Page warning tone may be controlled by Admin. Programming.
When the page timer expires, the paging connection is automatically released and ICM
busy tone is presented to the paging station.
You should lift the handset to make a page. When trying to make a page without lifting
handset, "LIFT HANDSET TO PAGE" displays on the LCD.
Paging can be programmed to a Flex. button.
If an intercom call is received to the paging station, the caller will hear an intercom busy
tone.
If a CO line call is received at the paging station, the station will receive off-hook ring.
A station may respond to a meet me page regardless of assignment of pick-up/paging
group assignment/page access.
A Page from a CO line can't be answered by pressing the [HOLD/SAVE] button or the
code for meet-me answer. If a user tries to answer a meet me page request from CO line,
an error tone is heard and an LCD message for error will be displayed.
Paging Timeout Timer (PGM 181 - FLEX 10)
Page Warning Tone (PGM 161 - FLEX 4)
Page Access (PGM 111 - FLEX 8)
Internal Page Zone (PGM 118)
External Control Contact (PGM 168)
SBX IP 320 Features & Operation Guide
158