Vertical SBX IP 320 Features & Operation Manual page 173

Rerouting
To deactivate Call Forward:
1.
2.
3.
Condition
•
Admin Programming
•
•
Call Forward, Unconditional
A user forwards all calls immediately to another station, Hunt Group, or VMIB.
Operation
To activate Unconditional Call Forward:
1.
2.
3.
4.
5.
To assign {CALL FORWARD} button at a flexible button:
1.
2.
3.
4.
5.
6.
Lift the handset or press the [SPEAKER] button.
Press the [DND/FOR] button.
Press the # key (Call Forward cancel code).
To use Call Forward, a Station should be activated in Admin Programming.
Allow Off-Net Call Forward (PGM 111 - FLEX 18)
Authorization Code Table (PGM 227)
Lift the Handset or press the [SPEAKER] button.
Press the [DND/FOR] button.
Dial the Call Forward code 1.
Dial Station or Group pilot number to receive the calls.
Replace the handset and go on-hook.
Press the [TRANS/PGM] button.
Press a flexible button.
Press the [DND/FOR] button.
Assign Call Forward type 1.
Dial the destination that will receive the call.
Press the [HOLD/SAVE] button to accept changes.
SBX IP 320 Features & Operation Guide
163