Vertical SBX IP 320 Features & Operation Manual page 181

Rerouting
Call Forward, Follow Me
Follow-Me Call Forward can be activated at the Station or from any Station in the system with
Call Forward access. It must be programmed from the Station that you will be forwarded to and
a user password must be entered at the User Station first.
Operation
To activate Follow-me Call Forward from any Station:
1.
2.
3.
4.
5.
6.
To deactivate Follow-me Call Forward from the Station (User Station Only):
1.
2.
3.
To register the authorization code in a station:
1.
2.
3.
4.
Condition
•
Lift the Handset or press the [SPEAKER] button.
Press the [DND/FOR] button.
Dial Call Forward Code 0.
Dial forwarding Station number.
Dial forwarding Station authorization code.
Replace the Handset and go on-hook.
Verify the line is in an idle state.
Press the [DND/FOR] button.
In off-hook state, press the [DND/FOR] button and dial #.
Press [TRANS/PGM] button.
Dial 31.
Enter the desired Authorization Code (5 digits).
Press [HOLD/SAVE] button to Save.
An Authorization code must be registered to use Follow-me Call Forward.
SBX IP 320 Features & Operation Guide
171