Vertical SBX IP 320 Features & Operation Manual page 234

Voice Service
•
•
•
•
Admin Programming
•
Two-way Recording via VMIB
This feature allows a station to record a conversation in the mailbox by pressing a {RECORD}
button while the station is talking with a CO party.
Operation
To set a flexible button programmed for 2-way record feature,
1.
2.
3.
4.
While a station user is in a conversation with a CO line caller, the user presses the {RECORD}
button and the conversation will be recorded in the user's mailbox. The user presses the
{RECORD} button again or hangs up to end the recording.
Conditions
•
•
•
•
•
This feature is available in the SMDI mode only, not in the DTMF mode.
Not available for intercom call recording.
If the system has a VMIB, the conversation will be recorded to the VMIB.
If Pole 3 of DIP SW1 of MBU is set to OFF (down position) and system has VMIB, the
conversation will be recorded to the VMIU.
Two Way Recording (PGM 112 - FLEX 10)
Press the [TRANS/PGM] button.
Press the flexible button to be assigned.
Press the [TRANS/PGM] button and dial "54".
Press the [HOLD/SAVE] button.
During the recording feature is enabled, the {RECORD} button will flash at 240 ipm and
if it is disabled, the {RECORD} button will be extinguished.
Not available to SLT.
Recording operation is canceled when station goes off-hook, presses the {RECORD}
button again, presses the [FLASH] button, or the CO party hangs up.
Not available for intercom call recording.
If the system has an external voice mail system, the conversation will be recorded to the
external voice mail system.
SBX IP 320 Features & Operation Guide
224