Vertical SBX IP 320 Features & Operation Manual page 180

Rerouting
Operation
To activate incoming CO Line off-Net at the Attendant:
1.
2.
3.
4.
5.
6.
To deactivate CO Line Off-Net Call Forward (from the attendant station):
1.
2.
3.
4.
5.
Conditions
•
•
•
•
•
Lift the handset or press the [SPEAKER] button.
Press the [DND/FOR] button.
Dial Call Forward code 7.
Dial CO Line/group access code (9, 801-8xx, 8801-88xx, or 8* for all CO Lines) or press
{CO Line} button.
Dial the Speed Dial bin number with the desired telephone number.
Replace the Handset and go on-hook.
Lift the Handset or press the [SPEAKER] button.
Press the [DND/FOR] button.
Dial Call Forward code 7.
Dial CO Line/group access code (9, 801-8xx, 8801-88xx, or 8*) or press {CO Line}
button.
Dial number.
If there is no idle CO Line, Off-net Call Forward is not activated.
This feature is not applicable for DID lines.
It is unconditional and forwarded immediately when the CO Line rings in the system.
If a speed bin is programmed in a Flexible button, you may press the Flexible button
instead of dialing the speed bin number.
Toll restriction will be based on the COS of outgoing CO Line.
SBX IP 320 Features & Operation Guide
170