Vertical SBX IP 320 Features & Operation Manual page 158

Outgoing Call Access
To cancel ACNR:
Conditions
•
•
•
•
Admin Programming
•
•
•
•
•
•
Last Number Redialing
The last dialed number on a CO Line can be stored (up to 32digits) in the station's Last Number
Redial buffer. The user may select to redial the last number dialed on the system. Each DKTU
with an LCD panel in the system has 10 individual last dialed number directory locations.
Press the flashing [REDIAL] button.
-or
Lift the handset
or
Press the [MUTE] button while a CO Line is accessed to cancel ACNR.
A DKTU that doesn't have a [REDIAL] button, should be programmed with a [REDIAL]
Flexible Button to use ACNR:
[TRANS/PGM] + FLEX + [TRANS/PGM] + 97 + [HOLD/SAVE] (2 or 8 Button only)
The analog CO Lines in the system should be equipped with Call Progress Tone detection
Units (CPTU).
When a predefined CO Line is busy in ACNR mode, an available CO Line in the same
group will be secured.
ACNR Pause Timer (PGM 180 - FLEX 10)
ACNR Delay Timer (PGM 180 - FLEX 8)
ACNR Tone Detect Timer (PGM 180 - FLEX 13) - applicable to analog CO Line only
ACNR No Answer Timer (PGM 180 - FLEX 9)
ACNR Retry Counter (PGM 180 - FLEX 11)
ACNR Tone Cadence (PGM 423)
SBX IP 320 Features & Operation Guide
148