Vertical SBX IP 320 Features & Operation Manual page 143

ISDN Service
•
•
•
•
•
•
•
•
When the call is routed to a member of a UCD/ Circular/ Terminal station group, the CLI
Message Wait will be provided to the first ringing station.
If the external party releases the line during the VMIB announcement, the CLI Message
Wait is not saved to any stations. If the external party releases the line during that time
that a station is ringing after the VMIB announcement, the CLI Message Wait will remain
at the first ringing station.
Though the call is routed to station (A) that is forwarded to the another station (B), the
CLI Message Wait is provided to the original station (A). The basic rule for CLI Message
Wait follows the rule of the "Message Wait" feature.
If there is no remaining buffer, the following warning message will be printed out
through RS-232C "WARNING: CLI MESSAGE WAITING BUFFER FULL".
If the CLI number is programmed in the SPEED BIN No. Table with the "name" and the
CLI name display ADMIN programmed, then the name will be displayed in the LCD.
The CLI number and CLI user name is toggled by pressing the [CALLBK] button.
When a user tries to delete all CLI messages at his station and some VMIB voice message
wait exist together with CLI message, the "all CLI delete" feature cannot be activated.
Because the priority of the message wait is as follows:
VMIB message wait ->CLI message wait -> VM Group message wait
If the duplicated CLI messages are left at a station, the LCD of the station will display the
CLI message with the CLI duplicated counter (max 15) and the latest message left time.
If CLI print admin program is set, CLI and Station Number are printed through the
RS-232C port.
SBX IP 320 Features & Operation Guide
133