Vertical SBX IP 320 Features & Operation Manual page 212

Supplementary Service
To retrieve an SMS in a DKTU:
1.
2.
3.
Conditions
•
•
•
•
•
•
When the new message is received, following display is shown.To retrieve, press
[CALLBK].
S M S
Then the SMS message list is shown.
* 1. This is James........
2. Hello......
To retrieve the content, press the number of message (ex. Press Digit 1). Then the content
will be shown.
Lines of a long message can be scrolled by using the volume up/down button.
This is James. Please ca ll me first
thing Monday morn ing on the ....
While you are retrieving SMS messages you can use the [CONF] button to delete the
message or the [SPEED] button to move to the upper menu.
In the case of power failure, all SMS messages will not be protected.
A max of 4 SMS Channels are serviced.
A max of 100 SMS messages can be stored in the SBX IP 320 system. If the SMS
message buffer is full, a warning message is sent to attendant and a new SMS message
cannot be received.
When the SMS destination is an SLT, the SBX IP 320 tries to regenerate the SMS
message three times when the destination is in idle state. If the destination does not
respond to the call for regeneration, the SMS message is deleted from the SBX IP 320
after retrying three times.
The feature "Sending SMS to PSTN destination" is available from applications such as
ez-Phone, Nomad SP, Nomad IP, and SMS SLT.
ezPhone, Nomad SP, and Nomad IP can send an SMS message with a max of 160
characters.
SBX IP 320 Features & Operation Guide
202