Emergency Intrusion - Vertical SBX IP 320 Features & Operation Manual

Call Handling

Emergency Intrusion

If an Emergency Supervisor Station calls another station and the Supervisor receives a busy
tone, the Supervisor can dial the Emergency Intrusion code and converse directly with the called
station.
Operation
To activate Emergency Intrusion:
Conditions
•
•
•
•
•
•
•
•
Admin Programming
•
Dial the Emergency Intrusion code '#' while encountering a busy tone.
An Emergency Intrusion call is only possible when the calling station is set to be an
Emergency Supervisor in Admin programming.
If the station was talking to another station or CO line, the call is disconnected when the
station receives an Emergency Intrusion call.
The busy station is connected to the Emergency supervisor after a short beep tone
indication.
An Emergency Intrusion call is not possible to a station in a DND state.
An Emergency Intrusion call is not possible to an Attendant.
An Emergency Intrusion call is not possible to a Net DSS.
An Emergency supervisor is connected to the Master station of a Linked pair if both the
Master and Slave are busy.
An Emergency supervisor is connected to the Secretary Station instead of Executive
station.
Emergency Supervisor (PGM 112 - FLEX 24)
SBX IP 320 Features & Operation Guide
38