Vertical SBX IP 320 Features & Operation Manual page 162

Outgoing Call Access
To display and enter a Speed Dial bin by scrolling:
1.
2.
3.
4.
To store Station Speed Dial numbers from an SLT:
1.
2.
3.
4.
5.
To make a call using Station Speed Dial from an SLT:
1.
2.
3.
To delete a Station Speed Dial from an SLT:
1.
2.
3.
4.
Conditions
•
•
•
•
•
Press the [TRANS/PGM] button.
Press the [SPEED] button.
Dial the Speed Dial bin number.
Press the [UP] or [DOWN] key to display the next/previous Speed Dial number.
Lift the handset.
Dial the Speed Dial program code 555.
Dial the Speed Dial bin number (000-099).
Dial the desired phone number (up to 24 digits).
Press and release the hook-switch.
Lift the handset.
Dial the Speed Dial access code 558.
Dial the Station Speed dial bin (000-099).
Lift the handset.
Dial the Speed Dial access code 555.
Dial the appropriate Station Speed Dial bin (000-099).
Press and release the hook-switch.
A CPTU should be installed to detect a dial tone.
The Station Speed Dial is secured in data protect mode when the power is OFF.
There can be a maximum of 24 digits in a station Speed Dial number including special
digits and function codes.
If you dial an empty station Speed dial bin, an error tone will be heard.
If you select a CO Line before dialing a Speed Dial bin number, the selected CO Line is
used even though there is a programmed CO Line in the Speed Dial bin number.
SBX IP 320 Features & Operation Guide
152