Vertical SBX IP 320 Features & Operation Manual page 214

Traffic Analysis
Operation
The traffic analysis is only available at the main Attendant (refer to the Attendant Programming
Menu Table in the Programming Guide). The measurement time type can be one of Today's peak
time, Yesterday's peak time, Last hour, Yesterday's total and Today's total.
To print all summary traffic report:
1.
2.
3.
4.
To print all summary traffic report periodically:
1.
2.
3.
4.
To cancel periodic printing of all summary traffic report:
1.
2.
3.
To print the each traffic report:
1.
2.
3.
4.
Conditions
•
•
Admin Programming
•
Press the [TRANS/PGM] button.
Dial 0121.
Select Measurement Time type.
Press the [HOLD/SAVE] button.
Press the [TRANS/PGM] button.
Dial 0122.
Select the Measurement Time type.
Press the [HOLD/SAVE] button.
Press the [TRANS/PGM] button.
Dial 0123.
Press the [HOLD/SAVE] button.
Press the [TRANS/PGM] button.
Dial 0124-0129.
Select Measurement Time type or CO group number if required.
Press the [HOLD/SAVE] button.
This feature is available at the main Attendant station.
The Printing of all summary service will generate an attendant traffic report, call
summary report, H/W unit usage summary report, and CO traffic summary report.
Print Port Selection (PGM 175)
SBX IP 320 Features & Operation Guide
204