Sos Paging - Vertical SBX IP 320 Features & Operation Manual

Paging
Conditions
•
•
Admin Programming
•

SOS Paging

The system allows the recording of multiple VMIB messages for pre-recorded paging. A
recorded VMIB message can be paged to a page zone in an emergency.
Operation
To assign {VMIB SOS Paging} at a flexible button:
1.
2.
3.
4.
5.
To activate VMIB SOS paging:
Conditions
•
•
•
•
Lift handset to make a page.
If there is any recorded message, it is paged and if there is no recorded message, user's
voice is paged.
Paging Timeout Timer (PGM 181 - FLEX 10)
Press the [TRANS/PGM] button.
Press the FLEX button to assign.
Dial paging code (5xx).
Dial Message number (001-070).
Press the [HOLD/SAVE] button.
Press the assigned {VMIB SOS Paging} flexible button.
This feature can be only activated by pressing an assigned flexible button on a DKTU in
an idle state.
The VMIB message for SOS Paging can be recorded only at an Attendant station.
Paging zones include internal, external, and all call paging area.
VMIB SOS paging is not restricted by VMIB Paging timer. The whole VMIB SOS
paging can be paged even though Paging Timeout timer expires.
SBX IP 320 Features & Operation Guide
160