Send & Retrieve Messages; Responding To A Station Message Waiting Indication - Vertical SUMMIT IP Phone User Manual

Chapter 3
SEND & RETRIEVE MESSAGES

Responding to a Station Message Waiting Indication

Another station can leave a Station Message Waiting indication (MWI) when you do not answer or
your phone is in DND mode. The message icon will be displayed on the LCD screen in IP-8024. If
programmed, a flashing MSG LED on the SUMMIT IP Phone also will indicate when there is a
Message Waiting. As a further notification, a Message Wait Reminder Tone can be provided. You
may review and delete messages as well as respond with a call back.
To retrieve Station Messages Waiting
1. Press [MESSAGE/CALL BACK] button, the message contents summary as below
or the Station Messages Waiting list will display.
Dial "1" to select ST (Station Message Wait)
2.
"1" => ST: Station Message Wait,
"2" => CL: CLI Message Wait
"3" => VS: Integrated VM Message Wait
"4" => VM: external Voice Mail
"5" => FS: Feature server
"6" => SMS Message Wait
3. Press the [VOL UP]/[VOL DOWN] button to scroll through the Station Messages.
To return a call for the current Station Message
1. Press the [HOLD/SAVE] button
To delete the first Message Wait from the list
1. Press the "*" button, the list is updated removing the message from the list.
To delete all waiting Messages
1. Press the [SPEED] button.
Press the "*" button twice.
2.
Release 1.0
ST CL VS VM FS
001 001 005 006 001 004
.
IP Station User Guide
SUMMIT
MS
April 2014