On Hook Dialing; Paging - Vertical Edge 120 User Manual

On Hook Dialing

You can make outgoing calls from your digital speakerphone without
lifting the handset, and you can monitor the dialing status through the
built-in speaker. The button lamp is lit when you are making a call.
Operation
1. Without lifting the handset, dial any extension number. (Hot Key
must be enabled in the phone system programming.)
Or...
2. Without lifting the handset, press any outside line button and dial.
3. When Hot Key is disabled, press the SPK button or press an idle
outside line button. Then dial without lifting the handset.

Paging

You can make a public announcement to all extension users or to a
portion of users. The DX-120 system provides both all-call (heard by
all users) and page zone (heard by a specific group of users) paging
that you access by dialing special codes. Page announcements are
heard over extension speakers.
Operation
1. While in the idle condition – lift the handset.
2. Dial the Zone Page access code (extensions)
want to page, or to page all users, press the FEATURE button
designated as ALL PAGE (if available) or dial the All Call Page
access code
3. You hear the Page Alert Tone.
4. Make paging announcement.
5. Hang up when finished.
Page 14
external page
.
for the group of users you
Edge 120 Digital Executive Telephone User Guide
– ,
–