Epson Stylus Pro 7700 Service Manual page 68

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
Top Menu Menu Item
FRONT EDGE STAND
PAPER SETUP
BY
PAPER THICKNESS
HEAD
ALIGNMENT
ALIGNMENT
PRODUCT DESCRIPTION
Table 1-8. Menu Mode Settings List
Settings
(shaded one is the default)
Selects the paper top stand by position for pre printing (paper is loaded) and post printing (after auto-cut)
STANDARD POSITION
depending on the paper type.
STANDAD POSITION
Normally use this option.
BACK POSITION
BACK POSITION
Loads the paper with less paper loading length. Use this option when printing on media such as transparent
film to avoid the tracks of the paper.
SELECT PAPER TYPE Sets thickness of paper to be used.
• When Epson paper is used, select the paper type.
SELECT THICKNESS
• When not Epson paper is selected, enter the thickness of the selected paper.
AUTO Sets whether to carry out the head alignment adjustment automatically or manually.
AUTO:
The adjustment is carried out automatically after the adjustment pattern is printed.
MANUAL:
MANUAL
Select this to carry out the adjustment manually (visually check the patterns and enter selected values) after
printing the adjustment pattern.
Control Panel
Explanation
Revision H
Applied
model
√
√ √ √
√ √ √
68
Confidential