Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
No.
Message on LCD
31
INK CARTRIDGE
INK LOW REPLACE INK CARTRIDGE
32
BLACK INK MISMATCH
THE TYPE OF BLACK INK IS DIFFERENT
TO CANCEL PRINTING
CANCEL THE PRINT JOB
TO CONTINUE PRINTING
CHANGE THE BLACK INK
33
INK LOW
INK CARTRIDGE ERROR
34
REPLACE CARTRIDGE
NO MAINTENANCE TANK
35
INSTALL THE LEFT SIDE MAINTENANCE TANK
NO MAINTENANCE TANK
INSTALL THE RIGHT SIDE MAINTENANCE
TANK
36
NOT ENOUGH EMPTY SPACE
REPLACE THE LEFT SIDE MAINTENANCE
TANK
NOT ENOUGH EMPTY SPACE
REPLACE THE RIGHT SIDE MAINTENANCE
TANK
REPLACE MAINTENANCE TANK SOON
37
MAINTENANCE TANK ERROR
REPLACE THE LEFT SIDE MAINTENANCE
TANK
MAINT TANK ERROR
REPLACE THE RIGHT SIDE MAINTENANCE
TANK
TROUBLE SHOOTING
Description
The ink cartridge is expended.
The setting of the black ink cartridge differs from the printer
and printer driver.
The ink cartridge is nearly expended.
The connection failure between the CSIC and the connection
terminals of the printer.
The CSIC has a defect.
The dew condensation occurs to the Ink Cartridge.
The Maintenance Tank (L or R) is not set in the printer.
The maintenance tank (L or R) is not recognized.
The maintenance tank is almost full so the cleaning cannot
be performed.
The maintenance tank is not correctly set in the printer.
The maintenance tank (L or R) is not recognized.
Remedies for Error Messages
Remedy/Points to be checked
Replace the Ink Cartridge with a new one.
To continue printing, press the
button to change the black ink.
Replacement of the ink cartridge is nearly needed.
Remove the Ink Cartridge once, and install it again correctly.
Replace the Ink Cartridge with a new one.
Replace the Ink Cartridge with a new one.
Leave the Ink Cartridge at the room temperature for more than four
hours and install it again.
Install the Maintenance Tank (L or R) correctly.
Remove the Maintenance Tank (L or R) once, and install it again
correctly.
Check the connection between the Maintenance Tank (L or R) and the
Main Board Assy.
Replace the Maintenance Tank (L or R) with a new one.
Replace the Maintenance Tank with a new one.
Remove the Maintenance Tank (L or R) once, and install it again
correctly.
Remove the Maintenance Tank (L or R) once, and install it again
correctly.
Check the connection between the Maintenance Tank (L or R) and the
Main Board Assy.
Replace the Maintenance Tank (L or R) with a new one.
Revision I
(See P.208)
(See P.208)
117
Confidential