Epson Stylus Pro 7700 Service Manual page 224

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
10. Release the cables from the clamp.
11. Remove the two screws that secure the Front Cover Sensor L.
A) Black, Phillips, Bind P-tite M3x10: two pieces
12. Remove the Front Cover Sensor L while drawing out the harness from the hole on
the Main Frame.
DISASSEMBLY & ASSEMBLY
See Figure 4-41.
Disassembly and Assembly Procedure
B
- Front left -
Front Cover Sensor L
Clamp
Figure 4-41. Removing the Front Cover Sensor L
Revision I
Front Cover Sensor L
Hole
224
Confidential