Epson Stylus Pro 7700 Service Manual page 67

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
Top Menu Menu Item
CUSTOM PAPER
PLATEN GAP
THICKNESS
PATTERN
PAPER SETUP
PAPER FEED ADJUST
DRYING TIME
PAPER SUCTION
SET ROLL PAPER
TENSION
REMOVE SKEW
PRODUCT DESCRIPTION
Table 1-8. Menu Mode Settings List
Settings
(shaded one is the default)
You can select a number (between 1 to 10) to register the settings (such as Paper Type, Platen Gap, Thickness
PAPER NO.1 - 10 Pattern, Paper Feed Adjust, Drying Time, Paper Suction) or to recall these settings you have made. The number
you select here is displayed on the LCD panel.
NARROW
Adjusts the platen gap (gap between the printhead and paper surface) according to the paper thickness.
STANDARD
STANDARD: use this setting under normal conditions
WIDE NARROW: select this when using thin paper.
WIDE, WIDER: select this when smudges or blurring appear due to an excess pressure on the paper.
WIDER
WIDEST: select this when using heavy paper.
WIDEST
PRINT Prints a pattern for checking the thickness of the loaded paper.
0.00% Adjusts the paper feed line pitch.
The larger the value is, the more the possibility to cause white bands on printout image.
-0.70% to +0.70%
The smaller the value is, the more the possibility to cause black bands on printout image.
0.0 SEC
Sets a time period to pause the carriage movement for drying the printed surface. Depending on paper type and
density, drying ink may take longer. Check the result and set longer time period in such case.
0.0 SEC to 10.0 SEC
STANDARD
Sets the power level of the suction fan.
-1 to -4
NORMAL
When using a cloth or thin paper or when winkles appear in the paper during printing, select
HIGH
"HIGH" or "HIGHER".
HIGHER
ON
Sets whether to perform this operation to reduce the paper skew or not.
OFF
Control Panel
Explanation
Revision H
Applied
model
√ √
√ √ √
√ √ √
√ √ √
√ √
√
√ √ √
√ √
√ √ √
67
Confidential