Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.2.9 Front Cover (Middle)
1.
Open the Front Cover (Middle).
In the next step, the cover will drop immediately after removing the
C A U T I O N
last screw. Therefore, make sure to hold the cover when removing
the last few screws.
2.
Remove the 12 screws that secure the Front Cover (Middle), and remove the Front
Cover (Middle).
A) Black, Phillips, Bind P-tite M4x10: 12 pieces
When replacing the Front Cover with a new one, check if washers
C A U T I O N
are installed to the screw holes (x4) as shown below. If installed,
transfer them to the new Front Cover.
(Epson Stylus Pro 9700/9710/9900/9910 only.)
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
Front Cover (Middle)
A
Figure 4-25. Removing the Front Cover (Middle)
Revision I
213
Confidential