Epson Stylus Pro 7700 Service Manual page 206

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.2.4 IC Cover (L/R) & IC Shaft Cover (L/R)
Basically you can remove this part on the left and the one on the
C H E C K
right in the same way. Therefore this section describes the way to
P O I N T
remove the one on the right only.
1. Turn the printer ON.
2. Press the [Ink Cover Open] button on the Control Panel to open the IC Cover R.
3. Turn the printer OFF.
In the case that the IC Cover cannot be opened by the Control
C H E C K
P O I N T Panel operation for some reasons, follow the procedure of 4.4.1.2
Unlocking the IC Cover manually
4. Remove the two screws that secure the IC Shaft Cover R.
A) Silver, Phillips, Bind machine screw M3x8: two pieces
When removing the screws, hold up the IC Cover to insert a driver.
C H E C K
P O I N T
5. Remove the IC Cover R and the IC Shaft Cover R.
DISASSEMBLY & ASSEMBLY
(p202) to open the IC Cover.
Disassembly and Assembly Procedure
A
Figure 4-18. Removing the IC Cover (L/R) & IC Shaft Cover (L/R)
Revision I
IC Shaft Cover R
IC Cover R
206
Confidential