Epson Stylus Pro 7700 Service Manual page 347

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.8.18 Carriage Motor
1. Remove the Color Measurement Device.
2. Remove the Mounter. (p327)
3. Remove the Front Cover. (p331)
4. Remove the three screws that secure the shield plate, and remove the shield plate.
A) Silver, Phillips, Bind machine screw M3x6: three pieces
5. Disconnect the relay connector, and release the cable from the clamp and the cable
retainer.
DISASSEMBLY & ASSEMBLY
(p325)
Disassembly and Assembly Procedure
Figure 4-226. Removing the shield Plate
Cable Retainer
Clamps
Figure 4-227. Disconnecting the relay connector
Revision I
Shield Plate
A
Relay connector
347
Confidential