Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.8.15 Cooling Fan 1
1.
Remove the Color Measurement Device.
2.
Remove the Mounter.
(p327)
3.
Remove the Front Cover.
(p331)
4.
Remove the Left Cover.
(p329)
5.
Remove the four screws that secure the Cooling Fan 1 mounting plate, and remove
the Cooling Fan 1 mounting plate.
A) Silver, Phillips, Bind P-tite M3x8: four pieces
6.
Disconnect the relay connector, and release the harness from the clamp.
7.
Remove the four screws that secure the Cooling Fan 1, and remove the Cooling
Fan 1.
B) Silver, Phillips, Bind S-tite with S.W & P.W. M3x12 & nut: four pairs
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing the Cooling Fan 1.
<Adjustment Item>
1.
Counter Clear (FAN)
DISASSEMBLY & ASSEMBLY
(p325)
(see p351)
and perform
Disassembly and Assembly Procedure
Relay connector
Cooling Fan 1
mounting plate
Figure 4-217. Removing the Cooling Fan 1 mounting plate
Cooling Fan 1
Figure 4-218. Removing the Cooling Fan 1
Revision I
Clamps
Cooling Fan 1
A
Cooling Fan 1
mounting plate
B
342
Confidential