Epson Stylus Pro 7700 Service Manual page 367

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
Measuring
microphone
Center of the timing belt
Figure 5-15. Measuring the Timing Belt Tension
ADJUSTMENT
Rear timing belt
CR Related Adjustment
19. Loosen the screws (x2) that secure the Driven Pulley Holder.
20. Adjust the belt tension with the tension adjusting screw.
After adjusting the tension, tighten the screws loosened in
to Step 17.
If larger than standard value: Turn the screw in a clockwise.
If smaller than standard value: Turn the screw in a counterclockwise.
Screw
Figure 5-16. Tension Adjusting Screw
Revision I
Step 19, and then back
Tension adjusting screw
367
Confidential