Epson Stylus Pro 7700 Service Manual page 314

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.7.2 Take-up Reel Sensor
1. Remove the screw that secures the Take-up Reel Sensor.
A) Black, Phillips, Bind P-tite M3x10: one piece
2. Remove the Take-up Reel Sensor from the Auto Take-up Reel.
3. Disconnect the connector from the Take-up Reel Sensor.
DISASSEMBLY & ASSEMBLY
Take-up Reel Sensor
Disassembly and Assembly Procedure
A
Figure 4-172. Removing the Take-up Reel Sensor
Revision I
Auto Take-up Reel
314
Confidential