Epson Stylus Pro 7700 Service Manual page 340

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.8.14 Paper Pressing Encoder
1. Remove the Color Measurement Device.
2. Remove the Mounter. (p327)
In the next steps, take care not to damage the scale of the Paper
C A U T I O N
Pressing Encoder.
3. Remove the three screws that secure the shield plate, and remove the shield plate.
A) Silver, Phillips, Bind machine screw M3x6: three pieces
4. Remove the screw that secures the encoder mounting plate, and remove the
encoder mounting plate.
A) Silver, Phillips, Bind machine screw M3x6: one piece
5. Remove the screw that secures the Paper Pressing Encoder.
B) Silver, Phillips, Bind P-tite M3x8: one piece
DISASSEMBLY & ASSEMBLY
(p325)
Disassembly and Assembly Procedure
Figure 4-214. Removing the shield Plate
Encoder mounting plate
C
B
Figure 4-215. Removing the encoder mounting plate
Revision I
Shield Plate
A
B
C
340
Confidential