Epson Stylus Pro 7700 Service Manual page 215

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.2.11 Spindle Cover R
1. Remove the Control Panel. (p203)
2. Remove the IC Cover R and the IC Shaft Cover R.
3. Remove the Maintenance Tank R.
4. Remove the Right Cover. (p209)
5. Open the Roll Cover Assy until the screw that secures the Spindle Cover R can be
seen.
6. Remove the three screws that secure the Spindle Cover R.
A) Silver, Phillips, Bind P-tite M4x12: two pieces
B) Silver, Phillips, Bind S-tite with S.W & P.W. M4x12: one piece
7. Remove the Spindle Cover R.
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
Disassembly and Assembly Procedure
A
Open it until
this can be seen.
Figure 4-28. Removing the screws (inside)
Spindle Cover R
B
Figure 4-29. Removing the Spindle Cover R
Revision I
Roll Cover Assy
Spindle Cover R
A
215
Confidential