Epson Stylus Pro 7700 Service Manual page 214

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.2.10 Top Cover
1. Remove the IC Cover (L/R) and the IC Shaft Cover (L/R).
2. Remove the Maintenance Tank (L/R).
NOTE: There is no Maintenance Tank (L) mounted for the Epson Stylus Pro
7700/7710/7700M/7710M/7900/7910/WT7900/WT7910/7890/7908.
3. Remove the Control Panel. (p203)
4. Remove the Right Cover. (p209)
5. Remove the Left Cover. (p211)
6. Open the Front Cover (Middle).
7. Remove the eight screws that secure the Top Cover.
A) Silver, Phillips, Bind machine screw M4x10: eight pieces
8. Close the Front Cover (Middle), and remove the Top Cover.
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
Disassembly and Assembly Procedure
Front Cover (Middle)
Top Cover
Figure 4-26. Removing the Top Cover (1)
Top Cover
Figure 4-27. Removing the Top Cover (2)
Revision I
A
Front Cover (Middle)
214
Confidential