Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
6.4 Cleaning
CLEANING BY FEEDING PAPER
When dirt on some roller is attached on the printed paper, make sure to clean the soiled
roller by feeding/ejecting plain paper as follows.
1.
Turn on the printer, and set the roll paper. (Set the roll paper of 44-inch width for
Epson Stylus Pro 9700/9710/9900/9910/9890/9908, and 24-inch width for Epson
Stylus Pro 7700/7710/7700M/7710M/7900/7910/7890/7908.)
2.
Press the [Paper Feed (Forward)] button to feed the paper.
3.
Repeat feeding until the paper is not soiled with ink.
MAINTENANCE
CLEANING THE PLATEN
If the back of the printed paper is smeared, make sure to clean the platen as follows.
1.
Turn off the printer.
2.
Open the front cover and use a soft clean cloth to clean away any dust or dirt in the
direction of the arrow.
If there is a serious problem of dirt, clean it using a soft, clean cloth dampened
with a mild detergent. Then, wipe the platen with a dry, soft cloth.
Figure 6-2. Cleaning the platen
Do not touch the feed rollers or waste ink pads (the parts marked
C A U T I O N
with pink in Figure 6-2).
Cleaning
Revision I
450
Confidential