Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.7.3 Take-up Reel LED
1.
Remove the Flange from the Auto Take-up Reel.
2.
Remove the Take-up Reel Cover.
3.
Disconnect the connector (CN1) on the Main Board.
4.
Remove the four screws that secure the Power Supply Unit, and remove the Power
Supply Unit.
A) Black, Phillips, Bind S-tite M3x6: four pieces
5.
Disconnect the connector (CN23) on the Main Board.
6.
Release the harness from the cable guide, and remove the Take-up Reel LED.
Figure 4-173. Removing the Flange
DISASSEMBLY & ASSEMBLY
(p313)
Auto Take-up Reel
Flange
Disassembly and Assembly Procedure
A
A
A
CN1
Figure 4-174. Removing the Power Supply Unit
Take-up Reel LED
Cable guide
Figure 4-175. Removing the Take-up Reel LED
Revision I
Power Supply Unit
Main Board
A
Main Board
CN23
315
Confidential